Pouring a garage slab without the right gravel base is one of the most expensive mistakes in residential concrete work. The gravel distributes load, drains water, and prevents frost heave from cracking the slab in year two. Getting the quantity right the first time saves a second delivery charge and keeps your project on schedule.
Quick-reference table: gravel by garage size
All figures use compactable crusher run at 1.4 tons/cu yd. Cubic yards are pre-compaction (what you order). Ton figures match the order quantity. The 20×20 row is highlighted — the most common two-car size.
| Garage Size | Sq Ft | Cu Yds @ 4″ | Cu Yds @ 6″ | Tons @ 4″ (+15% comp.) |
|---|---|---|---|---|
| 18 × 20 | 360 | 4.4 | 6.7 | 7.1 |
| 20 × 20 ★ | 400 | 4.9 | 7.4 | 7.9 |
| 20 × 24 | 480 | 5.9 | 8.9 | 9.6 |
| 24 × 24 | 576 | 7.1 | 10.7 | 11.5 |
| 24 × 30 | 720 | 8.9 | 13.3 | 14.4 |
How to read this table: The "Cu Yds @ 4″" column is your raw calculated volume. The "Tons @ 4″" column already includes the 15% compaction factor — that's what you actually order from the supplier. If your supplier quotes only in cubic yards, add 15% to the base volume column yourself.
Have a non-standard size? The calculator handles any dimensions — just enter length, width, and depth.
Use the Calculator →What type of gravel goes under a garage slab?
Two materials do most of the work, in two separate layers:
#57 crushed stone (optional drainage layer)
This is washed, open-graded stone about 3/4″ in size. It doesn't compact — it stays loose and lets water drain freely. Some builders put 2–3 inches of #57 stone directly under the vapor barrier to create a drainage break between the slab and the soil. It's especially useful on sites with no slope and heavy clay.
Compactable gravel (the main base)
Called crusher run, road base, Class 5, or processed gravel depending on your region. It's a blend of angular crushed stone and stone fines (dust) that locks together under compaction to form a rigid platform. This is what the table above is calculated for. Do not use pea gravel, river rock, or washed round stone as a base. It won't compact and will shift under load.
Never use play sand as a base. It's a common mistake — sand compacts well initially but pumps up through cracks over time in wet conditions. Compactable gravel handles both load-bearing and drainage without this failure mode.
Layer breakdown: what goes where
4″ minimum for passenger vehicles. 5–6″ for heavy trucks or lifts.
Sits directly on top of the gravel base, under the slab. Prevents ground moisture from wicking up.
Open-graded drainage layer. Use if site has drainage issues or heavy clay. Sits on top of compactable base.
Crusher run or road base, compacted in 3-inch lifts. This is the structural layer. This is what you're calculating for.
Non-woven 4-oz fabric at the very bottom. Keeps subgrade soil from migrating up into the gravel base over time.
Must be stripped of topsoil and organics. Slope to drain away from slab center if possible.
How deep should gravel be under a garage slab?
4 inches is the minimum for most residential garages on stable, well-draining soil. If the ground freezes in your region and your site drains well, 4 inches is typically sufficient.
6 inches is the right call when:
- Soil has high clay content (drains slowly, expands when wet)
- Site has poor natural drainage or sits at the bottom of a slope
- You're in a climate with deep freeze lines (northern US, upper Midwest, Canada)
- Previous construction on the site left soft spots or fill areas
Some contractors in the far north use 8 inches as a standard. The cost difference between 4 and 6 inches on a 20×20 garage is roughly 2.5 yards — about $100–150 at typical bulk prices. It's cheap insurance.
Step-by-step: measure, calculate, order, spread
-
1Measure the footprint
Measure the inside dimensions of the foundation walls, not the outside. If the garage isn't square, break it into rectangles and add the areas.
-
2Calculate cubic yards
Formula: (Length × Width × Depth in inches) ÷ 324. For a 20×20 at 4 inches: (20 × 20 × 4) ÷ 324 = 4.94 cubic yards.
-
3Add 15% for compaction
Compactable gravel typically loses 10–15% of its volume when compacted. Multiply your cubic yard figure by 1.15. 4.94 × 1.15 = 5.68 yards.
-
4Convert to tons if needed
Multiply cubic yards by 1.4 (for crusher run). 5.68 × 1.4 = 7.95 tons. Round up to the nearest half-ton when ordering.
-
5Order and schedule delivery
Confirm whether the supplier quotes by the ton or cubic yard. Get delivery 1–2 days before the concrete pour. Wet gravel that sits too long before the pour can shift; fresh is better.
-
6Spread and compact in lifts
Spread in 3-inch layers and compact each layer before adding the next. Don't dump all the gravel and compact once — you won't get uniform density at depth.
Worked example: 24×24 garage at 6-inch depth
Order 12.5 yards or 17.5 tons. Round up, not down — leftover gravel is useful; coming up short mid-project costs time and a second delivery fee.
Common mistakes when ordering garage base gravel
-
Ordering by volume when the supplier quotes by ton. If you've calculated 5 cubic yards but the supplier quotes in tons, convert before you call. 5 cu yd × 1.4 = 7 tons. If you just say "5 yards worth" and they bill by the ton, you'll get 3.6 yards and wonder where your gravel went.
-
Skipping the 15% compaction factor. What you spread is not what you end up with. Compactable gravel loses roughly 1 inch per 7 inches of loose depth. If you order exactly what the volume formula gives you, you'll come up short.
-
Using the wrong gravel type. Washed gravel (pea gravel, #57 stone, river rock) doesn't compact. It stays loose and moves under load. Your slab will crack. Use crusher run or processed base material — something with fines in it.
-
Not stripping topsoil first. Organic material compresses and decomposes under load. Strip the top 4–6 inches of topsoil before the gravel goes in. The garage floor will be lower than grade — that's correct.
-
Compacting the whole base at once. A plate compactor can only effectively compact 3–4 inches of material. Dump all 6 inches at once, compact once, and the bottom 2–3 inches stay loose. Compact in lifts.
Aggregate Markets connects you with local bulk material suppliers for crusher run, road base, and #57 stone. Compare prices from multiple suppliers before you call one.
Supplies from Home Depot
You'll need a few tools to spread and compact the gravel properly. These are one-time purchases that also get used on driveway and patio projects.
Plate Compactor (rental)
A hand tamper isn't enough for a garage base. Rent a gas plate compactor. Most rental centers stock them for $60–100/day.
Shop at Home Depot →Landscape / Geotextile Fabric
Use a 4-oz or heavier non-woven geotextile at the base. Avoid thin garden fabric — it tears during gravel placement.
Shop at Home Depot →6-Mil Poly Sheeting
The vapor barrier goes between the gravel and the slab. Overlap seams by 12 inches and tape them. Pull it up the footings 6 inches on all sides.
Shop at Home Depot →Steel Wheelbarrow
For moving gravel from the pile to tight spots a loader can't reach. A 6-cu-ft steel tray holds up to 200 lbs. of gravel.
Shop at Home Depot →Tamping Bar / Hand Tamper
Useful for corners and edges the plate compactor can't reach. Work around the perimeter after every plate compactor pass.
Shop at Home Depot →Laser Level
Keeps the finished gravel surface flat and at the right elevation before the concrete crew arrives. Rotary laser models project a grade around the whole perimeter.
Shop at Home Depot →FAQ
A 20×20 garage (400 sq ft) needs approximately 4.9 cubic yards or 6.9 tons of compactable gravel at a 4-inch depth. At 6 inches deep you need 7.4 cubic yards or 10.4 tons. Add 15% for compaction loss, bringing your order to roughly 5.7 yards or 8 tons at 4 inches. See the quick-reference table above for the exact order quantities.
Use compactable gravel — also called crusher run, road base, or Class 5 gravel — as the main base layer. It contains a mix of stone sizes plus stone fines that lock together under compaction. A layer of #57 crushed stone (washed, open-graded) directly under the vapor barrier improves drainage. Never use pea gravel or washed round stone as a base — it won't compact and will shift under load.
4 inches is the minimum for a residential garage slab on stable, well-drained soil. Use 6 inches if the soil has poor drainage, high clay content, or a history of frost heave. Some contractors in cold northern climates use 8 inches as a standard to handle deep freeze lines. The cost difference between 4 and 6 inches on a 20×20 is roughly $100–150 in material — worth it on a new build.
A woven geotextile fabric at the bottom of the gravel base prevents soil from migrating up into the gravel over time — a process called pumping. It's especially important in clay soils. Use a 4-oz or heavier non-woven geotextile, not the thin plastic sheeting sold for weed control. Thin sheeting tears during gravel placement and offers no real benefit.
Compactable gravel (crusher run) typically weighs 1.4 to 1.5 tons per cubic yard. #57 crushed stone runs a bit lighter at 1.3 to 1.4 tons per cubic yard. Use 1.4 as a safe multiplier when your supplier quotes by the ton and you've calculated cubic yards — it's better to order slightly more than to come up short mid-project.